Growth mechanism and gas-sensing characteristics of organic-additive-free zinc oxide of various shapes

Zinc oxide is widely used in gas sensors, solar cells, and photocatalysts because of its wide bandgap and exciton binding energy of 60 meV in various metal oxides. To use ZnO as a gas sensor, it is necessary to synthesize it with surface defects and a large specific surface area. In this study, hydrothermal synthesis without surfactants was employed to obtain organic-additive-free ZnO. For morphology control, we varied the ratio of the hydroxide ion concentration to the zinc ion concentration. To confirm the growth mechanism of ZnO, we performed X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analyses. Raman spectroscopy and photoluminescence measurements were performed to analyze the surface properties. The Brunauer–Emmett–Teller method and probe stations were used to measure the specific surface area and sensitivity of the gas sensor, respectively. The results confirmed that flower-shaped ZnO is the most suitable gas-sensing material.     

粮仓环境监测系统设计

随着科学技术的发展,粮食行业信息化发展得到了强有力的科技支撑。为满足粮库整体信息化建设的要求,打破"信息孤岛"现状,实现资源整合、数据共享,为大数据分析和数据应用提供数据基础,设计一款能够实时采集粮仓内温湿度、氧气、二氧化碳气体浓度、粮堆高度的数据集成系统。系统采用分层分布式结构,由数据集中器和多种传感器模块组成,数据集中器与各传感器模块间通过RS485总线进行数据通讯,并由数据集中器通过网络专线传输汇总的环境监测数据,通过专用软件进行数据处理和挖掘,从而实现粮仓环境监测和预警等功能。     

Design optimization of semiconductor piezoresistors with Schottky diode contacts

A modeling theory is developed to predict the performance of piezoresistors which incorporate Schottky diode electrical contacts. This new theory allows the design of high performance gauges which can be fabricated using Non-Lithographically-Based Microfabrication (NLBM) techniques. These semiconductor piezoresistors can be designed in customizable sizes and fabricated in parallel in order to integrate position sensing into MEMS flexural positioners. Customizable sensing for nanopositioning platforms will enable advances in a range of nano-scale fabrication and metrology applications. A semiconductor piezoresistor with Schottky diode contacts was fabricated and attached to a titanium flexure. This device is shown to match predicted electrical performance within about 8% and to show a gauge factor of 116, within 2% of the predicted value. Optimized performance limits for Schottky diode semiconductor piezoresistors are identified to be about 127 dB full noise dynamic range for a quarter bridge over a 10 kHz sensor bandwidth on a 600 μm width titanium flexure, making them ideal for sensing on meso-/micro-scale flexural positioners. Methods are suggested for achieving the performance limits indicated above and the impact of these methods on the sensor dynamic range are studied.     

A novel graph-based clustering method using noise cutting

Recently, many methods have appeared in the field of cluster analysis. Most existing clustering algorithms have considerable limitations in dealing with local and nonlinear data patterns. Algorithms based on graphs provide good results for this problem. However, some widely used graph-based clustering methods, such as spectral clustering algorithms, are sensitive to noise and outliers. In this paper, a cut-point clustering algorithm (CutPC) based on a natural neighbor graph is proposed. The CutPC method performs noise cutting when a cut-point value is above the critical value. Normally, the method can automatically identify clusters with arbitrary shapes and detect outliers without any prior knowledge or preparatory parameter settings. The user can also adjust a coefficient to adapt clustering solutions for particular problems better. Experimental results on various synthetic and real-world datasets demonstrate the obvious superiority of CutPC compared with k-means, DBSCAN, DPC, SC, and DCore.     

Entwicklung und Validierung eines Kühlmittelsensors zur Bewertung der Korrosionsschutzwirkung

A sophisticated thermal management is one of the main subsystems that enables combustion engines with high power density. In this context the demands on coolants are also increasing. There has to be a certain level of corrosion protection to ensure the functionality of the cooling system. Hereafter the result of an electrochemical sensor development is presented. With the knowledge of analytical and electrochemical results a quick test for characterizing coolants corrosion protection has been developed and validated.     

Comparison of joint angle,velocity and acceleration estimators for hydraulically actuated manipulators to a novel dynamical approach

Excavators are used for a wide range of applications like earthworks and material handling. Assistance systems are becoming more common to support the operator. For monitoring and control based assistance functions the angular position, velocity and acceleration of the joints from the working implement are required. Commercial systems often use inertial measurement units, consisting of triaxial accelerometers and gyroscopes, to accomplish an estimation of those states. A novel joint angle, velocity and acceleration estimation for hydraulic manipulators is proposed and compared to state of the art methods. A decentralized kinematic filter using no information about the underlying system and a centralized kinematic filter taking the system kinematics into account are implemented as state of the art approaches. Both filters only use inertial measurement units to obtain information about the current state of the system. The novel centralized dynamic filter uses the same information as the centralized kinematic filter and extends it by a dynamic model containing additional information about the angular acceleration due to pressure readings of the hydraulic cylinders. Kalman filtering is used to combine the derived system and measurement models with the sensor information. The methods are evaluated on a material handling excavator for single and coupled movements of the working implement. The novel centralized dynamic filter enables improvements for the angular acceleration estimation compared to the decentralized and centralized kinematic filter. Less noise of the acceleration estimation and a better tracking of the actual acceleration are shown.     

WSNs中规避攻击者的源位置隐私保护路由协议

为了保证无线传感器网络（Wireless Sensor Networks，WSNs）中的源节点位置隐私安全，同时实现安全性能和网络能耗的均衡，提出了WSNs中规避攻击者的源节点位置隐私路由协议，该协议假设节点具有检测攻击者的能力，通过发出危险警告消息使路由路径上的节点采取路由改变策略，使攻击者无法回溯到源节点，延长了源节点保持位置隐私的安全时间。理论分析和仿真实验表明，该协议在消耗较少的通信开销的情况下保证了源节点位置的高度隐私。     

结合MNF变换和Canny算子的遥感影像变化检测

针对大面积区域的多时相遥感影像变化检测的需求，提出了一种基于最小噪声分离（MNF）的Canny边缘检测提取影像变化信息的检测方法。对多时相影像采用多种变换组合成具有多维波段信息的影像，采用最小噪声分离法分离噪声并得到单波段差异图，通过Canny边缘检测法计算梯度幅值，采用高低双阈值法细化边缘，从而提取差异图变化边缘，有效突出了变化信息。以1995年和2003年加扎勒河的两期遥感影像为例，利用两时相影像进行土地覆被变化检测。实验结果表明，该方法适用于监测大面积区域内地物的突变情况。在数据基础上进行最小噪声分离可以有效解决传统Canny边缘检测提取边缘时造成的伪边缘现象，同时采用高低双阈值法有效去除伪边缘点，从而获得更加精确、直观的变化检测效果，在自然地理变化监测、地理国情灾害监测等有很好的应用价值。     

2.3–21 GHz broadband and high linearity distributed low noise amplifier

This paper focuses on the design of a 2.3–21 GHz Distributed Low Noise Amplifier (LNA) with low noise figure (NF), high gain (S₂₁), and high linearity (IIP3) for broadband applications. This distributed amplifier (DA) includes S/C/X/Ku/K-band, which makes it very suitable for heterodyne receivers. The proposed DA uses a 0.18 μm GaAs pHEMT process (OMMIC ED02AH) in cascade architecture with lines adaptation and equalization of phase velocity techniques, to absorb their parasitic capacitances into the gate and drain transmission lines in order to achieve wide bandwidth and to enhance gain and linearity. The proposed broadband DA achieved an excellent gain in the flatness of 13.5 ± 0.2 dB, a low noise figure of 3.44 ± 1.12 dB, and a small group delay variation of ±19.721 ps over the range of 2.3–21 GHz. The input and output reflection coefficients S₁₁ and S₂₂ are less than −10 dB. The input compression point (P_1dB) and input third-order intercept point (IIP3) are −1.5 dBm and 11.5 dBm, respectively at 13 GHz. The dissipated power is 282 mW and the core layout size is 2.2 × 0.8 mm².     

Fault handling in large water networks with online dictionary learning

Fault detection and isolation in water distribution networks is an active topic due to the nonlinearities of flow propagation and recent increases in data availability due to sensor deployment. Here, we propose an efficient two-step data driven alternative: first, we perform sensor placement taking the network topology into account; second, we use incoming sensor data to build a network model through online dictionary learning. Online learning is fast and allows tackling large networks as it processes small batches of signals at a time. This brings the benefit of continuous integration of new data into the existing network model, either in the beginning for training or in production when new data samples are gathered. The proposed algorithms show good performance in our simulations on both small and large-scale networks.